CNC Router Machine
Common Proplem
1.Q:What format files does the Grblcontrol(Candle) software support?A:Support Gcode files of nc, ncc, ngc, tap, txt
2.0:What file formats does the Lasergrbl software support?A:Supportnc,cnc,tap,gcode,ngc,bmp,png,jpg,gif, svg
3.0:What should l do if the control board cannot be connected?
A:Exit the software, unplug the wire, and reconnectit. Or update the firmware.
4.Q:The X, y, and z axes of the machine cannot be moved, what shouldl do?A:First check whether the wires are correctly connected, whether the power switch of the control board is pressed, andthen check whether the lower coupling is off.
5.0:What materials can the milling cutter generally engrave or cut?
A:Wood, acrylic (acrylic), pcb, pvb, soft metal, iron, glass, stone lt can not be engraved, too hard or fragile to engrave.
6.Q:What materials can the laser generally engrave or cut?A:Wood, acrylic (acrylic), leather, kraft paper, metal paint, plastic,bamboo
7.0:What thickness of wood or acrylic can generally be cut by laser?A:3~5mm wood board (acrylic),speed setting 100, power setting 1000
8.Q:The engravedimage is reversed, what should l do?A:Enter S3=2 orSRST=*command
9.Q:How to modify the parameters when the limit switch is activated?
A:Enter $21=1 and $22=1 commands.
10.Q:How to view the default parameters of the three-axis control boardA:Enter $RST=* (restore the default value) first, and then enter $s, you can view the parameters in the control window.
11.0:What software is generally used to create NC files?
A:RecommendInkscape,Artcam or Beiiing Jingdiao
12.0:What should l do if the driver and software cannot be installed successfully?A:First install Win7 8l 10lXP under the supported system, then re-install or exit the anti-virus sottware and re-install13.0:What should l do if the laserstops working?
A:First check whether the laser line is in good contact, and then enter M3 s50 on the software to observe whether thelaser can be bright
14.0:The laser can't burn wood,what should ldo?
A:Adjust the laser focus to the minimum, and then set the power higher (above 600).